GUIDELINES
1. The bot when fully extended should fit within a box of dimensions
500*500*500 (dim in mm) (without weapon)
2. Including weapon (wedge or Flipper) bots must be within 550mm in length.
3. The weight of the machine should not exceed 25 Kg (55.12 Lbs). The weight
of the remote controller will not be counted. (For onboard battery bots,The
weight is inclusive of battery weight)
4. The bot should not be built from lego parts or any other ready-made kit.
5. The robot can have flippers, lifting devices, and wedges
6. Use of cutters and blades in the bot is not allowed.
7. The robot must be controlled only through a wired or wireless remote.
8. Length of wire for robot control and power supply should not exceed 5 m
each.
9. In the event of wires entangling, the coordinator may reset the match.
10. Jumping, hopping, and flying are not allowed.
11. The robots should not secure themselves on the ring surface by using
suction cups, diaphragms, sticky treads, glue, or other such devices.
12. Use of weapons designed to cause invisible damage to the opponent such
as Tesla coils, Van de Graff generators, stun guns, or similar equipment is
prohibited.
13. Inflammable liquids, gases, and the use of explosives are prohibited.
14. The voltage difference at any point in the bot at any time should not exceed
24V. The power supply can be onboard/off-board.
15. the Maximum number of members in a team is limited to 5.
16. The decision of the coordinators will be final.
17. The coordinators have the authority to alter any of the above-mentioned
rules during the event.
18. In case of disputes, the decision of the event in charge will be final
Points allocation and Platform rules will be disclosed during the time of the
event.